Panjelasan Produk
● Sistim tekanan sarta aliran mesin suntik molding servo anu ganda katutup-loop, sarta sistem hidrolik suplai minyak nurutkeun aliran sabenerna sarta tekanan, nu overcomes konsumsi énergi tinggi disababkeun ku mudal tekanan tinggi tina sistem pompa kuantitatif umum. . Motor jalan nurutkeun speed set dina tahap aliran tinggi kayaning pre molding, nutup kapang jeung suntik lem, sarta ngurangan laju motor dina tahap aliran low kayaning tekanan ngajaga tur cooling. Motor pompa minyak sabenerna bisa Konsumsi geus ngurangan ku 35% - 75%.
● Kaunggulan tina servo mesin suntik molding, kayaning hemat energi, panyalindungan lingkungan, akurasi pengulangan tinggi, reliabiliti jeung durability, geus favored ku pasar jeung muji ku pamaké.
Spésifikasi
| Modél | HHF68X-J5 | HHF110X-J5 | HHF130X-J5 | HHF170X-J5 | HHF230X-J5 | ||||||||||
| A | B | C | A | B | C | A | B | C | A | B | C | A | B | C | |
| UNIT INJEKSI | |||||||||||||||
| Diaméterna screw | 28 (mm) | 30 (mm) | 32 (mm) | 35 (mm) | 38 (mm) | 42 (mm) | 38 (mm) | 42 (mm) | 45 (mm) | 40 (mm) | 45 (mm) | 48 (mm) | 45 (mm) | 50 (mm) | 55 (mm) |
| Screw L / D Babandingan | 24,6 (L/d) | 23 (L/d) | 21,6 (L/d) | 24,6 (L/d) | 24.3 (L/d) | 22 (L/d) | 24.3 (L/d) | 22 (L/d) | 20,5 (L/d) | 24,8 (L/d) | 22 (L/d) | 20,6 (L/d) | 26,6 (L/d) | 23,96 (L/d) | 21,8 (L/d) |
| Ukuran shot | 86 (cm3) | 99 (cm3) | 113 (cm3) | 168 (cm3) | 198 (cm3) | 241 (cm3) | 215 (cm3) | 263 (cm3) | 302 (cm3) | 284 (cm3) | 360 (cm3) | 410 (cm3) | 397 (cm3) | 490 (cm3) | 593 (cm3) |
| Beurat suntikan (PS) | 78 (g) | 56 (g) | 103 (g) | 153 (g) | 180 (g) | 219 (g) | 196 (g) | 239 (g) | 275 (g) | 258 (g) | 328 (g) | 373 (g) | 361 (g) | 446 (g) | 540 (g) |
| Laju suntik | 49 (g/s) | 56 (g/s) | 63 (g/s) | 95 (g/s) | 122 (g/s) | 136 (g/s) | 122 (g/s) | 150 (g/s) | 172 (g/s) | 96 (g/s) | 122 (g/s) | 138 (g/s) | 103 (g/s) | 128 (g/s) | 155 (g/s) |
| Kapasitas Plasticizing | 6.3 (g/s) | 8.4 (g/s) | 10.3 (g/s) | 11 (g/s) | 12 (g/s) | 15 (g/s) | 11 (g/s) | 14 (g/s) | 17 (g/s) | 16.2 (g/s) | 20 (g/s) | 21 (g/s) | 19 (g/s) | 24 (g/s) | 29 (g/s) |
| Tekanan suntik | 219 (Mpa) | 191 (Mpa) | 168 (Mpa) | 219 (Mpa) | 186 (Mpa) | 152 (Mpa) | 176 (Mpa) | 145 (Mpa) | 126 (Mpa) | 225 (Mpa) | 178 (Mpa) | 156 (Mpa) | 210 (Mpa) | 170 (Mpa) | 140 (Mpa) |
| Speed screw | 0-220 (rpm) | 0-220 (rpm) | 0-220 (rpm) | 0-185 (rpm) | 0-185 (rpm) | ||||||||||
| UNIT CLAMPING | |||||||||||||||
| Clamp Tonnage | 680 (KN) | 1100 (KN) | 1300 (KN) | 1700 (KN) | 2300 (KN) | ||||||||||
| Togél Stroke | 300 (mm) | 320 (mm) | 360 (mm) | 430 (mm) | 490 (mm) | ||||||||||
| Angkasa tohan. Tie-bar | 310x310 (mm) | 370x370 (mm) | 430x415(415x415) (mm) | 480x480(470x470) (mm) | 532x532 (mm) | ||||||||||
| jangkungna Max.Mold | 330 (mm) | 380 (mm) | 440 (mm) | 510 (mm) | 550 (mm) | ||||||||||
| Jangkungna kapang Min | 120 (mm) | 140 (mm) | 140 (mm) | 170 (mm) | 200 (mm) | ||||||||||
| Stroke Ejector | 80 (mm) | 100 (mm) | 120 (mm) | 140 (mm) | 140 (mm) | ||||||||||
| Ejector Tonnage | 38 (Kn) | 45 (Kn) | 45 (Kn) | 45 (Kn) | 70 (Kn) | ||||||||||
| Nomer Ejector | 5 (PC) | 5 (PC) | 5 (PC) | 5 (PC) | 9 (PC) | ||||||||||
| LAIN | |||||||||||||||
| Max.Tekanan Pompa | 16 (Mpa) | 16 (Mpa) | 16 (Mpa) | 16 (Mpa) | 16 (Mpa) | ||||||||||
| Pompa Motor Power | 7,5 (Kw) | 11 (Kw) | 13 (Kw) | 15 (Kw) | 18,5 (Kw) | ||||||||||
| Daya Pamanas | 6,15 (Kw) | 9.8 (Kw) | 9.8 (Kw) | 11 (Kw) | 16,9 (Kw) | ||||||||||
| Dimensi Mesin | 3.4x1.1x1.5 (m) | 4.2x1.15x1.83 (m) | 4,5 x 1,25 x 1,86 (m) | 5.1x1.35x2.1 (m) | 5.5x1.42x2.16 (m) | ||||||||||
| Beurat Mesin | 2.6 (T) | 3.4 (T) | 3.7 (T) | 5.2 (T) | 7 (T) | ||||||||||
| Cap Tangki Minyak | 140 (L) | 180 (L) | 210 (L) | 240 (L) | 340 (L) | ||||||||||
